Haga una pregunta sobre Coches y obtenga una respuesta
Thanks to use Justanswer.
Your problem is found at the fuel injection pump,
code 1689 means comunication between pcm and injection pump is lost,
you must check wiring harness from the injection pump to pcm,
if thats correct you must replace injection pump control module.
code 1693 only says that you have a code stored on pcm but as result code 1689 so
when code 1693 get fixed car will start.
have a good day, dont forget to provide me a good feedback for the help =)
can you tell me what color or diagram or what tape the test need for check
sorry colors of the cables
ok friend, dont forget to left feedback for service =)
im check the injection pump harness connector is ok and what mean is STIS?
hi friend, i dont understand about stis
where you get that parameter?
sorry it was a typing error,
i just told that check the injection pump wiring harness,
now you must check the wiring diagram.
yes i ready check the injection pump harness connector is ok what is next step to follow
next step is check the wiring diagrams.
ok can you give me diagrams please
ok i will provide the wiring diagram from the transfer pump to the pcm.
here is the link to download diagram.
please dont forget to provide me a good feedback =)
ok I check as the diagram says,
the pump is activated when the switch is opened, has 12 vtl _ positive and negative I erase the codes and back to read again and give a code P1693,
i ready check yellow with white line wire from line furl pump to ecm is good continuity and have 12 vlts and check wire black with white line this have good continuity
ok by the way you must have to replace injection pump friend.
thats final step.
ese el el problema queno arranca bueno
this is the problem the no start
so the fuel injector pump need to reprograming
you have to do this job.